Hydraulic Home Villa Elevator

Strong adaptability,there is no well can be,no machine room,the top layer is
higher than 2 meters can be installed
Low civil construction requirements,can do 0 bottom pit or shallow pit plan,no
need to do high strength well in advance,reduce the owner’s construction diffi-
culty and cost
High space utilization,no counterweight device,so that the utilization rate can
be increased to 70%:
Flexible layout,strong compatibility,indoor,outdoor,middle of the stairs,
corner,balcony,floor opening,hanging,special well can be installed.

Product Introduction

Hydraulic home elevator for villas adopts the principle of “pressure rise and gravity drop”, utilizing an advanced hydraulic cylinder, special pump station, and intelligent control system. This home hydraulic lift elevator features an imported high-precision proportional valve to achieve step-less speed regulation, ensuring a stable and comfortable ride.

It is also equipped with a first-line safety light curtain, speed governor, and safety gear system, effectively preventing any accidental fall and guaranteeing the safe and smooth operation of the hydraulic elevator for home. This makes it an ideal solution for private residential buildings, duplex apartments, and villa applications that require reliability, low noise, and space-saving installation.

Unique features make our products unique

Space-Saving Design Without Overhead Machine Room

Our hydraulic home elevator eliminates the need for a bulky and expensive overhead machine room. This home hydraulic lift elevator is designed to be flush with the roofline, allowing for seamless integration into villas and residential homes with limited vertical space.

Maximized Shaft Space Utilization Without Counterweights

The hydraulic elevator for home is designed without a counterweight system, increasing the effective use of the elevator shaft space. This feature is especially beneficial for hydraulic passenger elevator applications in compact buildings, improving both functionality and design flexibility.

Lower Structural Requirements for Shaft Walls and Roof

Thanks to the smart load-bearing design of hydraulic passenger lifts, the vertical load is fully transferred to the foundation via the hydraulic cylinder. This reduces structural stress on shaft walls and roofs, making the hydraulic home elevator easier and more cost-effective to install, especially in private residences and villas.

Unique features make our products unique

Go for customization

Get the latest product information

PDF Sample Download

Our products can be installed in the following five building structures

The building has a special elevator well the elevator can be installed directly with in it

A suitable space exists around the central staircase An elevator should be installed in the shaft located in the middle

A hollow hall or room. An elevator can be installed in a hallway or room through the construction of a shaft.

the building, and thus the Suitable space exists within elevator can merely be installed indoors. Suitable holes should be drilled in the floor and an elevator and shaftway are to be installed.

Suitable space is lacking inside the building If possible, an additional shaft can be installed within the building and an elevator can be fitted

Tips

On occasions②③④⑤ the installation of an elevator shaft specifically designed is required. Customers can utilize metal frames or concrete, etc. to build the shaft in advance. We recommend that customers opt for a special frame shaft for villa elevators.

Size

(1)Minimum Customized Size100*1100mm

(2)Minimum Top-level Height2600 mm

(3) Mininum Pit height 150mm

Maintenance Tips for Hydraulic Home Elevators

– For every 1,000 working hours or once a year, clean the oil tank and replace the hydraulic oil. If the home hydraulic lift elevator is used less frequently, replace the oil at least every two years. After two years of operation, a professional inspection and maintenance is recommended to ensure long-term reliability of your hydraulic home elevator.

– Check all hydraulic pipelines and joints. Ensure there are no damages or leaks. All fittings in your hydraulic passenger elevator must be secure and tightened to prevent performance issues or safety risks.

– Disassemble the lowering valve, clean the plunger with compressed air, and reassemble. This ensures smooth descent operation and maintains system response in hydraulic passenger lifts.

– Drain all used hydraulic oil and remove the filter. After cleaning and drying it with compressed air, reinstall it into the fuel tank. Finally, reconnect the hydraulic lines and fill with fresh oil for optimal elevator performance.

The material of the hydraulic domestic elevator

Steel Structural Cross-Section

The Characteristics of Steel Structure Shaft Frame

It offers high cost-effectiveness. The Exterior anel will be subsequently sealed and integrated with the design style by the decoration unit. The installation position can be treely chosen, and the surface is sprayed with rust-resistant treatment, being resistant to corrosion.

High-Level Spray-Painted Steel Frame Construction

Aluminum alloy cross section

The Characteristics of Aluminum Alloy Cross-Section

An independent frameless glass design does not add to the building cost. It features excellent light transmittance and seamless integration with indoor decoration. The installation location can be freely chosen. It is corrosion-resistant and has a long service life. Industrial grade aluminum alloy is chosen, and the glass is made

Hight-Level Spary-Painted Aluminum Alloy Frame Construction

Protective Device Eliminate Hidden Safety Hazards

Single-touch dialing

Our hydraulic home elevator is equipped with an intelligent one-touch dialing module. In case of emergency, users can automatically dial pre-configured numbers with a single press, ensuring safety in residential and villa elevator applications.

ARD (Automatic Rescuer Device)

If the power supply fails, the hydraulic passenger elevator activates the ARD system, automatically powering the elevator to the nearest floor and opening the doors. This function ensures passengers exit safely, even in power outages.

Protective apparatus

ARD (Automatic Rescuer Device)

Protective apparatus

Push-Button Call Panel Options

The call box of our hydraulic residential elevator is customizable, offering multiple button styles and displays. Choose from modern or classic panels based on your home style or project requirements, ensuring smooth integration in villas and compact buildings.

Hall Door Style Options

The hall door style of our hydraulic home elevator is fully customizable, offering various door opening options and elegant cabin interiors. Whether you’re outfitting a modern villa or a classic residence, you can choose from luxurious metallic finishes, minimalist black panels, or custom-engraved surfaces to suit your architectural style and personal preferences.

Start Our First Collaboration - Your Custom Home Elevator Solution, Delivered in 3 Business Days

Why Choose Us?

With 10,000+ satisfied customers worldwide and 10+ international certifications, we guarantee top-tier quality and reliability for every project. Our commitment includes:

✓ 10+ Industry Certifications (CE, ASME, ISO, etc.) – Ensuring compliance and safety

✓ 10,000+ Successful Installations – Trusted by homeowners & developers globally

✓ End-to-End Support – From design to installation, backed by a dedicated project team

✓ Tailored Solutions – Customizable for luxury villas, aging-in-place homes & smart residences